Preformed Surfacing Sheets and Markings
Preformed thermoplastic markings take the hassle out of painting, with pre-made burn on designs with a life up to 10 times longer than paint! Simply let us know what design you need, in what colour, size and quantity.
Ask a question about this product
Due to the versatility of preformed thermoplastic markings, they can be applied to roads, car parks playgrounds, cycle lanes to name just a few.
Preparation is simple, all surfaces must be dry, clean and free from dust, oil and fuel spillage. Once this is achieved a thin layer of primer is highly recommended for concrete, stone and worn macadam surfaces, however using primer in general will ensure an enhanced adhesion, especially in cold conditions. Best results are achieved when using a hand burner lance. Normal traffic and use can begin once the material has fully cooled.
All markings are non toxic, contain no lead or chromate pigments and are skid resistant to SRV 55 and should be stored under cover away from frost and extreme heat.